Professionals Keep Your Bike Upright At All Times

When you use a tow bar, you lift the front wheel off the ground while keeping the back wheel on the road. At this angle, your motorcycle is at great risk especially when turning. If you run a corner too quickly, there’s a chance for the motorcycle to tip over. You don’t want to drag your precious motorcycle across the road on its side. That wouldn’t only ruin it aesthetically but there are parts that can get damaged due to the friction.

Professional towing companies on the other hand will use a flatbed. With this, they’ll lift the whole motorcycle in the tow truck and secure it upright. This prevents the chances of it being dragged on the road.

Back Wheel And Suspension Damages Are Avoided

With a tow bar, the motorcycle would be in a position where the front part is lifted while the back part touches the ground. Depending on your motorcycle and the tow bar that is used, the weight of the bike could be carried mostly by the back wheel. Due to that, you can expect your back wheel to receive wear and tear due to towing.

Additionally, such a position could also take a toll on the motorcycle’s suspension system. This position isn’t advisable especially when it is being towed for long distances. You might not easily notice the damage but upon riding your motorcycle, you could see that there is something wrong.

Decrease Chances Of Road Hazard Problems

A car that runs over a pothole or other road hazards like cracks and bumps may not have noticeable damage. However, if you run over such hazards while towing your motorcycle, you could easily damage it, especially at fast speeds.

Additionally, the attachment of your motorcycle to your vehicle may also come loose due to such road hazards. If you are not mindful of your motorcycle, you might leave it in the middle of the road, without easily noticing that it’s long gone.

In short, professional towing services just make it much safer for your motorcycles to be transported. Even if you pay them, at least you improve your chances of getting your bike to where it is supposed to be in good condition.

Motorcycles take a little more finesse to transport than a 4-wheeled car or truck.  That’s why it takes an experience towing company to transport a motorcyle properly.  Check out why Premio Towing Company is Dallas’ and Fort Worth’s #1 Motorcycle Towing Outfit…

The post Why You Should Hire A Professional To Tow Your Motorcycle appeared first on Premio Towing Company Dallas TX.

Ways To Tow A Motorcycle

There are different ways on how you can tow your motorcycle. First is by using a towing trailer. This provides a secure way of towing a motorcycle because the trailer is really built for the motorcycle. Another way is to use a motorcycle carrier. Additionally, a tow dolly can also be used. With this, you simply hook the front tire and drag the motorcycle while it is in neutral.

Now that you know that there are plenty of ways on how to tow a motorcycle, you can’t just tow it. There are still more things to learn and understand or else you simply end up damaging your motorcycle.

The Right Equipment For Motorcycle Towing

The first thing that you should learn before you even begin to attempt to tow your vehicle is the right equipment to use for the job. One of the most important to consider is if you have the right vehicle to tow the motorcycle.

It is not enough that you have a car that you can use. You have to make sure that it is capable and set up for the towing task. It should be able to handle the weight not only of your motorcycle but also the trailer or other equipment you’ll be using to tow the bike. Make sure to also check your tires if they are still good.

The next thing you should check is the trailer you are going to use. Make sure that it is really designed to transport motorcycles securely. Choose trailers that are specifically made for the task especially if you are planning to tow your motorcycle frequently.

If towing your motorcycle isn’t going to be done frequently, then it would be better to simply hire a towing company to do it for you. In that way, you’ll be sure that it is properly towed with minimal damage. Most towing companies have a flatbed tow truck that will surely fit the motorcycle. Also, towing companies already have experience in handling vehicles with a motorcycle loaded. They can easily estimate angles to use while turning or backing up with a trailer.

Towing Basics

Towing your motorcycle can seem like an easy task to do. Sure you might have sourced a vehicle and a trailer to use. You may even have loaded your motorcycle properly but remember that getting your motorcycle loaded into the trailer isn’t the end of the towing task. It is just the beginning and you need to be able to maneuver your vehicle and the trailer safely throughout the trip.

Before you start towing, you also need to know and consider the following:

• Tongue Weight – This is a very important thing to consider when towing your motorcycle. This refers to the pressure on your vehicle given by the hitch. The more the trailer is loaded with a heavier weight, especially if the weight is found on the front side of the trailer, the greater the pressure is.
• Payload – Another thing to consider is the payload. This term refers to the actual weight of those who are in the vehicle. If there are additional cargo that’s directly inside the vehicle, then the payload is greater. If you are using a pickup truck and the motorcycle is loaded there, then the payload also increases. It is important to note how much weight your truck can handle.

Securing The Motorcycle

If you’ve already considered all the things above and figure out that your equipment can handle motorcycle towing, it is now time to secure your motorcycle. Securing the motorcycle is a very important step in the safe towing of your bike.

Firstly, make sure the trailer is well secured, you won’t want your trailer to get loose while on the road. Secondly, you have to make sure the motorcycle is properly secured in the trailer. To do this, you need various motorcycle tie-downs that will pull the bike down and forward.

Tie-down straps can either be a cam buckle or a ratchet. Both will help secure the motorcycle and reduce shock loading by putting tension on the suspension.

Shock loading happens when the motorcycle’s suspension compresses because you go over a bump on the road while towing. When this happens, the straps can have slack temporarily then becomes taut again with the rebound. This can lead to loosening or breaking of the straps. This is why it is important to regularly re-tighten the straps throughout the towing trip.

Towing The Motorcycle

Once everything is secured, you have to do another check on your vehicle. Make sure the lights are working and make sure that the lights on the trailer are also working. Don’t rush into towing your motorcycle. Drive slowly but carefully. Allow space so you can stop and always consider your trailer when turning, speeding up, or slowing down.

Need a pro to tow your 2-wheeler?  Check out the experienced team at Premio Towing Company in Dallas…

The post Transporting You Motorcycle Yourself? Here’s Some Tips… appeared first on Premio Towing Company Dallas TX.